Spectrometer XRF EDX3600H is a energy dispersive laboratory X-ray fluorescence spectrometer EDXRF intended for elemental analysis in full scope. The advantage of the device in addition to the thermoelectric cooled SDD detector with a resolution of 135-145eV is the ability to work with in a vacuum atmosphere (for the analysis of light elements such as Al), and a large, opened from the top measuring chamber. It is possible to perform measurements in an open chamber, placing a sample of large or non-standard sizes. This model is particularly suitable for the analysis of samples of mineral and metal alloys. Spectrum separation technique improves the accuracy of simultaneous analysis of light elements.

Published in Spectrometers XRF

XRF spectrometer EDX 3000 is designed primarily for the analysis of precious metals in jewelry samples, coating thickness testing, testing RoHS Compliance. By using electrically-cooled Si-PIN detector with improved resolution enables separation of more complex alloys jewelry eg. white gold. Built-in camera allows precise measurement of selected point, which is especially important in the measurement of objects with low or irregular shapes such as rings, necklaces, etc. The spectrometer has an easy-to-use analysis software and the ability to add your own standards and create new calibration curves. Analysis by X-ray fluorescence XRF spectrometers are completely non-destructive, allow measurements of both raw materials and finished products.

Published in Spectrometers XRF

XRF spectrometer EDX1800B is X-ray fluorescence analyzer designed for analysis of compliance with the RoHS / WEEE directive. Measurements are fast and fully non-destructive, so the device is suitable for the measurement of semi-finished and finished products. It finds particular use in the quality control of electrical and electronic products, in the toy industry and ceramic industry. The software has a convenient function PASS / FAIL when performing measurements of the presence of hazardous elements such as mercury, cadmium, lead and chromium. In addition, you can customize spectrometer to analyze the chemical composition of the alloys, then it can be applied also in the recycling and sorting of metals and metal industry.

Published in Spectrometers XRF

XRF spectrometer EDX 880 is an easy-to-use analyzer for jewelry and other precious metal products, operating on the principle EDXRF spectrometer. The device works in the analysis of the chemical composition of typical jewelry alloys and in determining gold carats. Radiation source and detector (proportional counter) placed in the upper part of the housing allow for easier manipulation of the sample with non-uniform or curved surface. The spectrometer is recommended primarily for manufacturers of jewelry, jewelers, pawnshops, etc. Measurements by means of X-ray fluorescence spectrometers are completely non-destructive, so there are no concerns about the loss or damage to the test sample.

Published in Spectrometers XRF

XRF spectrometer EDX3000 PLUS is the latest model of energy dispersive X-ray fluorescence spectrometer EDXRF, designed specifically for non-destructive analysis of alloys and products made of precious metals. It has an ergonomic design, user-friendly interface and professional software causing that elemental analysis becomes simple and quick. Thanks to modern SDD detector with improved resolution, it is possible to separate elements found in typical alloys and alloys and other samples of unknown composition eg. white gold (Au + Cu + Zn + Ni) alloys Ag + Sn, Pt + Au alloys, Au + W, pollution in precious metals alloys, catalysts, and others. Is well suited for refining and recycling. Spectrometers of this type are recommended primarily for measurements jewelry alloys in pawn shops, bureaux de change, in the jewelry production and refining of gold.

Published in Spectrometers XRF

XRF spectrometer X-Calibur from company Xenemetrix is an X-ray fluorescence spectrometer EDXRF with high-power X-ray tube and compact construction. The analyzer offers high performance measurements and high resolution detector. The unique geometry of the type lamps "close couple" with the anode placed at the front, in conjunction with advanced construction of the optical system reduces the distance between the sample, lamp and the detector. This increases the accuracy and performance of measurements. nEXt ™ software, on which works all Xenemetrix company spectrometers provides full analysis of samples: qualitative, quantitative and semi-quantitative. In addition, devices are equipped with software Fundamental Parameters in basic or advanced version allowing analysis of even unknown matrices without reference.

The spectrometer can be widely used in such fields as petrochemicals, chemicals, polymers, forensic medicine, metallurgy, analysis of coatings, mining, environmental studies, research, etc.

 

 

Lear more? Visit: www.learnxrf.comwww.learnxrf.com

Published in Spectrometers XRF

XRF spectrometer Genius-IF first desktop EDXRF spectrometer with secondary reflections filters, is a combination of high-quality XRF measurements and economics at elemental analysis. This spectrometer provides a non-destructive qualitative and quantitative analysis in the range of C (6) Fm (100). The newest generation of the SDD detector has excellent spectral resolution and is optimized for the detection of elements in a wide range, also in troublesome so far XRF analysis of light elements.

IF Genius has a unique optical system combining eight secondary reflection filters, and eight filters in direct excitation mode. This ensures optimum excitation conditions for all elements detected by EDXRF. WAG (Wide Angle Geometry) is a patented by Xenemetrix system using reflective filter ensures optimal conditions for the analysis of the main elements and trace in the sample.

X-ray beam induces characteristic lines K for reflection filters (pure metal), which are then used to excite the sample with "monochromatic" beam. The use of filters enables a significant reduction in the detection limits for individual elements. Reduced detection limits make Genius IF unit most versatile and useful in a wide range of applications, including inaccessible to conventional EDXRF spectrometers.

 

Learn more? Visit: www.learnxrf.comwww.learnxrf.com

Published in Spectrometers XRF

Xenemetrix XRF spectrometer RoHS VISION is specifically designed to allow quick and easy analysis of the content of hazardous substances in accordance with the regulations concerning environmental protection RoHS (Directive on restriction of Hazardous Substances) and WEEE. Using RoHS VISION you can successfully carry out the analysis in accordance with all the requirements of RoHS, MCV verification procedures, using test procedures included in the bulletin IEC TC111. The analyzer combines proven Xenemetrix technology and a new intuitive technology Selective Acquisition Reflexive Matrix Technology (SMART), which allows the analysis of many complex materials without the knowledge of their composition.

RoHS Vision enables you to record the image of the analyzed area thanks to CCD camera with markers of dimensions for analysis of samples in micro and macro scale. The device is compact, with great analytical potential, yet easy to use for people who do not have extensive analytical knowledge.

Additionally spectrometer in the version of X-RoHS + SDD in addition to applications for analysis RoHS allows full qualitative and quantitative analysis in terms of F-Fm. It is equipped with SDD detector with optimized window for the measurement of light elements from fluorine. It is characterized by an extremely good resolution of 125 eV, so you can use it also for applications such as fuel analysis for sulfur, analysis of polymers, metallurgy, mineral analysis and forensics.

 

Lear more? Visit: www.learnxrf.comwww.learnxrf.com

Published in Spectrometers XRF

X-Cite is a basic spectrometer uses XRF technology to analyze samples without destroying them for universal applications. Advanced computational capabilities are integrated with the analyzer in order to ensure a consistent analysis and data transfer. It can be widely used in stationary laboratories and field ones in the enhanced casing options - ROBUST.

Primary applications: measurements of S in oils and fuels, Pb in gasoline, Ni and V in crude oil, S, Ni and V in the residual oil, the S in coke or coal, Mg, P, S, Ca, Ba, Zn, Mo in lubricating oils. In the forensic laboratories to identify traces found on the glass, steel, remnants of gunshots, car paint debris and ingredients for the production of drugs. Measurements in the cement industry: Na, Mg, Al, Si, S, K, Ca, and Fe in cement and clinker according to ASTM C-114.

XRF spectrometer X-CITE is also an excellent tool for the identification of the active ingredients in cosmetics and pharmaceuticals: Cr, Mn, Fe in the eye shadows; Fe, Ti and Zn foundation; Bi, Al, Ca, Mg in the antacids, laxatives; Analysis of personal care products (deodorants, preparations for hair care, teeth), antibacterial preparations; Ag, I and Zn in contact lenses; Ti and Zn in preparations with filters UVA / UVB rays.

X-CITE is also intended for measurements in the mining industry Zn metal, Zn powder, the production of ZnO; Fe metal, Fe powder, production of Fe2O3; -Al bauxite mining; Analyses of kaolin clay - pottery; tin ore, silver ore.

 

Lear more? Visit: www.learnxrf.comwww.learnxrf.com

Published in Spectrometers XRF

Compact XRF spectrometer S-MOBILE, thanks to a specially designed portable casing allows measurements in the field, when it is necessary to perform quick and accurate analysis. A high power XRF lamp (50kV, 50W) provides an analysis on the level of accuracy similar to the laboratory.

Xenemetrix spectrometer S-Mobile is simple to use, yet accurate and fully professional - works great where it is important to know the composition of the tested material. It is suitable for geological research, research in soil remediation, for rapid response units and numerous analyzes of in-situ processes.

Optionally available version of the ULS (Ultra Low Sulfur) - ideal for petrochemical applications and analysis of sulfur on the order of a single ppm levels, with a limit of detection of less than 1 ppm. Analysis in accordance with ASTM D4294 / 10, D7212, ISO 20847, IP 531 and others, defining a methodology of analysis of petroleum products without the need for helium scrubber.

 

Lear more? Visit: www.learnxrf.comwww.learnxrf.com

Published in Spectrometers XRF
Page 1 of 2