Biological microscope Levenhuk 625 operates using bright-field method and has an impressive zoom range from 40x to 2000x, allowing the research. The microscope has a binocular head, with the possibility of rotation, the ability to adjust the distance between the glasses and possibility to tilting glasses angle of 30 degrees.

The kit includes two sets of glasses (WF10x and WF20x) and four lenses (magnification 4x , 10x, 40x and 100x). To avoid aggravation image quality at high magnifications used technique of immersion oil. Suitable oil and blue filter sharpen filtr has been supplied. To further improve the quality of the image, can use the knobs adjustment coarse and precise. For the convenience of using a microscope it's equipped with a built-in lighting with adjustable brightness giving the right amount of light and movable table with the handle for preparations for easy adjustment of the position of the table without having to move the product.

TSS series vibrating sifter is a device for sieve analysis of bulk materials. Sifter is characterized by high accuracy of sifting, maintenance-free and silent operation; it can be used directly on the countertop laboratory. Laboratory sifter has the function of adjusting the time and shaking speed. It has a large selection of sieves of different mesh sizes (ordered separately).

Purpose: separation, fractionation, measurement of particle size
Application: Cement clinker, chemicals, coffee, construction materials, fertilizers, fillers, flour, grain, metal powders, minerals, nuts, plastics, sand, seeds, soil, etc.
Type of material: Loose materials, powders, suspensions

Small ball mill RJM30D is equipped with 3 adjustable roller and designed for reducing hard materials to powder. Digital table ball mill is generally used to grind material 7mm and finer, down to the particle size of 20 to 75 microns. BenchTop small ball mill RJM30D have fixed speed range and stepless speed change. Rollers are easily adjust to accommodate a variety of jar diameters (diameter of pot size is about 6.5cm~8.5cm). We have a wide range ball mill medias and mill jar, for example made by: stainless steel, zirconia, agate, corundum.

Biological microscope model Levenhuk320 is a special microscope, which is used in medicine, medical research, in the field of general studies such as biochemistry, phatoanatomy, cytology, hematology, urology, dermatology, biology, but also often used in higher education institutions to teaching and research purposes. Microscope Levenhuk 320 allows the observation of the material in the incoming light by bright field method.

Levenhuk 320 is equipped with built-in lighting with adjustable brightness, has a possibility to use immersion, which provides high resolution and magnification. Biological microscope has offered bilenticular 1.25 Abbe condenser, which allows to achieve satisfactory depth of sharpness, contrast and optical resolution. Levenhuk 320 is equipped with four achromatic lenses (AChR). Model 320 has a table with adjustable, integrated knob to precise and coarse adjustment, adjustable focus and glasses with a wide field of view. Ergonomic design and its handling operation makes it affordable for everyday use.

320 Levenhuk biological microscope is a professional laboratory microscope at an affordable price offering. Recommended to unscpecialisedvmedical researchv and scientific purposes.

 

Large ball mill RJM102 and RJM103 for laboratory use are equipped with double adjustable roll (RJM102) and 3-adjustable roll (RJM103). Large ball mill has function digital speed control and timer. Double roll ball mill can be equipped with small volume and large volume mill jar, 3-adjustable roll ball mill accept only small volume mill jar. Max. load: 40kg accept couple of mill jars together. Ball mills are used widely in the chemical, paint, coatings, and ceramics industries. We offer a wide range of mill jar and ball mill medias.
  

Spectrometer WQF 510A / 520A is a Fourier transform laboratory spectrophotometer IR (FT-IR), equipped with a unique Michelson interferometer. The spectrophotometer is controlled by a computer, switching between internal and an external light beam allows the use of special accessories such as IR microscope.

Sampling chamber is large enough to accommodate different types of snaps, we have to choose: a diamond ATR snap, ATR snap with a ZnSe crystal, scattering snap, flow cell for liquid samples, gas cuvette and IR microscope. There is possibility to buy IR spectra libraries in the field of the selected application.

Economic mechanical stirrers AML-P series are suitable for mixing a liquid with high viscosity and density. Laboratory stirrers have a continuously adjustable speed control, do not have a digital display. Provide stable performance, easy to use and maintain, are protected against overload.

Stirrersare supplied with one stir rod. We offer a wide selection of rods mixing for mechanical agitators such as paddle, anchor, propeller rods.

Propellers

AAS spectrometer AAS9000 is a single beam atomic absorption spectrometer AAS with the atomization flame and graphite furnace. It combines two techniques of AAS by installing two atomizers, flame FAAS and GFAAS electrothermal. The main advantage of the graphite furnace technique is to increase the detection limits (no dilution of the sample by gas) and the fact that the entire sample is atomized at the same time. Graphite furnace system is integrated with burner flame, which provides full automation of the process. Software running on Windows, allows easy control of the device, record of the findings in Excel format allows convenient processing. It allows to carry out fully automated quantitative and qualitative analysis, calculation of the concentration of elements and automatically generate a report from the analysis.

AAS spectrometer 6000 is a single beam atomic absorption spectrometer AAS in flame version. It is equipped with a computer controlled handle for 8 cathode lamps. All measurement parameters can be defined by input from the keyboard, eg .: number of lamps, lamp power supply current, the size of the high voltage, the selected wavelength, slit, the position of the burner, the ratio of the ignition / extinction to regulate combustion. The device features auto-gain, automatic zero setting, background correction, automatic energy compensation, automatic peak search, wavelength scanning, automatic peak search based on the value of the peaks. All readings, measurements, calibration curves and measurement conditions can be saved and / or printed.

AAS spectrometer can be used to measure the concentration in macro- micro- scale and determination of trace amounts of metals and semimetals in various types of substances. It is used in fields such as geology - the study of minerals, metallurgy - analysis of steel and non-ferrous metals, environmental testing of air, water quality, solid waste and sewage, petrochemical industry - examination of petroleum and related products, light industrial products, food and drug, test analysis of building materials, glass, ceramics, paints, etc.

High speed mechanical stirrers AM-S series for laboratorys are advanced, high speed mechanical stirrer with a stable, compact design, equipped with a micro-motor with speed control. Laboratory mechanical stirrer is suitable for mixing a liquid of low and high viscosity. The safe use with automatic overload protection. Start control system allows smooth and soft start to prevent spilling and splashing liquids.
Models "H" are equipped with digital display showing the speed of rotation.

The advantages of high-speed mechanical stirrers AM-S series is stable structure, easy operation and maintenance, protection against overload, precise speed control.

Stirrers are widely used in industrial, research, cosmetic laboratories for mixing and dispersing solid-liquid substances, liquid-liquid substances with different viscosity - from low to high. Suitable mixing different kinds of media with the possibility of using all from offered mixing rods (paddle, anchor, propeller rods).

Propellers

Page 3 of 7